NEW ULTIMATE DASHBOARD CALIBRATION LICENSE FOR RENAULT AND DACIA VEHICLES
We are happy to announce the launch of the new ABRITES license for mileage calibration of Renault and Dacia vehicles 2022+!
The RR030 – Dashboard Calibration in IC and ABS (ATE) modules for Renault and Dacia vehicles 2022+ license allows calibration of instrument clusters Visteon with S6J3 microcontrollers and mechanical pointers, and the ABS module (ATE), used in Dacia and Renault models, manufactured after 2022.
Using the RR030, you can easily change the mileage value in the dashboard the ABS module in a matter of minutes without any risks for the car!
Supported vehicles include:
Dacia Jogger
Dacia Sandero III/Logan III
Renault Trafic III ph2
The first step is to connect to the vehicle via internal CAN-Bus connection (CB021 cable). This is to process both the ABS module and the instrument cluster. Two backup files are created automatically and the first one should be programmed by ABPROG programmer, and the second one (config) might be necessary afterwards.
Second, carefully remove the instrument cluster module from the car, dismantle it and connect the ABPROG programmer to the PCB via the ZN093 adapter. All the information on wiring is readily available in the software under the “Programming” menu when the ABPROG is connected to AVDI. Make sure you follow the instructions on soldering strictly. Video is coming soon!
Third, when you install the instrument cluster back in the vehicle, you may need to write the config file, also done using the “Programming” function.
Don't forget to reset the maintenance intervals, as usual.
The great thing about the software part of the procedure is that you get an automatic backup of the module at every step of the way!
All these files are placed in your AVDI ID’s folder on your laptop and can be accessed when programming the module.
The new license for mileage calibration includes the functionality of the legacy RR029 license for mileage calibration of older models, which supports the vehicles equipped with Marelli/Calsonic Kansei dashboards with mechanical pointers or Visteon virtual instrument clusters.
All the hardware and software you need for the task:
RR030 Dashboard Calibration in IC and ABS (ATE) Modules for Renault and Dacia vehicles 2022+•
AVDI ABRITES Vehicle Diagnostic Interface
ZN030 ABPROG
CB021 Jumper Cable for Renault and Nissan vehicles
ZN093 S6J3 Adapter
AMS Active Annual Maintenance Subscription
